Operation Manual
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Connecting the power
- Connecting a computer
- Connecting Video source devices
- Connecting an HDMI source device
- Connecting a Component Video source device
- Connecting a Composite Video source device
- Connecting an iPhone/iPod device
- Connecting an external speaker
- Connecting a wireless dongle
- Connecting to an external memory device
- Playing sound through the projector
- Operation
- Starting up the projector
- Switching input signal
- Adjusting the projected image
- Hiding the image
- Securing the projector
- Selecting the aspect ratio
- Optimizing the image
- Operating in a high altitude environment
- Adjusting the sound
- Firmware upgrade
- Personalizing the projector menu display
- Playing files with iPhone/iPod
- Using iPhone/iPod pop-up menus
- Displaying images with PC and Video source devices
- Using PC/ Video pop-up menus
- Displaying files with internal memory, USB Drive and SD card
- Using USB Streaming
- Using Wireless Streaming
- Settings menu
- Shutting down the projector
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation
86
FUNCTION DESCRIPTION
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 44 for details.
Audio
Settings
Allows you to enter the audio setting menu. See "Adjusting the
sound" on page 44 for details.
SRS HD
Turns on/off SRS HD surround sound effects.
Mute
Sets the mute function.
Keypad tone
Sets the keypad tone function.
Audio in Standby Mode
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press /
to choose the source that you wish to use. See "Connection" on
page 21 for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
Menu Display
Time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Security
Settings
See "Securing the projector" on page 39 for details.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See "Choosing a location" on page 15 for
details.
2. Advanced menu