Operation Manual
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Connecting the power
- Connecting a computer
- Connecting Video source devices
- Connecting an HDMI source device
- Connecting a Component Video source device
- Connecting a Composite Video source device
- Connecting an iPhone/iPod device
- Connecting an external speaker
- Connecting a wireless dongle
- Connecting to an external memory device
- Playing sound through the projector
- Operation
- Starting up the projector
- Switching input signal
- Adjusting the projected image
- Hiding the image
- Securing the projector
- Selecting the aspect ratio
- Optimizing the image
- Operating in a high altitude environment
- Adjusting the sound
- Firmware upgrade
- Personalizing the projector menu display
- Playing files with iPhone/iPod
- Using iPhone/iPod pop-up menus
- Displaying images with PC and Video source devices
- Using PC/ Video pop-up menus
- Displaying files with internal memory, USB Drive and SD card
- Using USB Streaming
- Using Wireless Streaming
- Settings menu
- Shutting down the projector
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation
84
3.
Network
Wi-Fi Mode AP Mode
Device Name BenQ GP3
Security None/WPA2/WPA/WEP
Encryption Key xxxxxxxxx
Show Encryption Key No/Yes
Wi-Fi Mode Client Mode
Wi-Fi Connection
Configure Manually assign IP
IP Address
Netmask
Gateway
DNS
Apply
4.
Information
Source
Picture Mode
Color System
Resolution
LED Lamp Lifetime
Internal Memory
SD Card
USB Drive
Firmware Version