Operation Manual
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Connecting the power
- Connecting a computer
- Connecting Video source devices
- Connecting an HDMI source device
- Connecting a Component Video source device
- Connecting a Composite Video source device
- Connecting an iPhone/iPod device
- Connecting an external speaker
- Connecting a wireless dongle
- Connecting to an external memory device
- Playing sound through the projector
- Operation
- Starting up the projector
- Switching input signal
- Adjusting the projected image
- Hiding the image
- Securing the projector
- Selecting the aspect ratio
- Optimizing the image
- Operating in a high altitude environment
- Adjusting the sound
- Firmware upgrade
- Personalizing the projector menu display
- Playing files with iPhone/iPod
- Using iPhone/iPod pop-up menus
- Displaying images with PC and Video source devices
- Using PC/ Video pop-up menus
- Displaying files with internal memory, USB Drive and SD card
- Using USB Streaming
- Using Wireless Streaming
- Settings menu
- Shutting down the projector
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation
66
Picture Mode
Settings
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type.
Reference Mode
Selects a picture mode that best suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below.
This function is only available when User is selected.
Brightness
Adjusts the brightness of the image.
Contrast
Adjusts the degree of difference between dark and light in the image.
Color
Adjusts the color saturation level -- the amount of each color in a
video image.
Tint
Adjusts the red and green color tones of the image.
This function is only available the system format is NTSC.
Sharpness
Adjusts the image to make it look sharper or softer.
Color Temperature
Adjusts the color temperature. At higher color temperatures, the
screen looks colder; at lower color temperatures, the screen
looks warmer.
Save Settings
Saves the settings made for User mode.
Play Settings
Play Mode
Lets you choose to play one video or all videos in a folder.
Play Order
Lets you select the playback order of video files.
Repeat
Lets you select whether to repeat video playback.