Operation Manual
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Connecting the power
- Connecting a computer
- Connecting Video source devices
- Connecting an HDMI source device
- Connecting a Component Video source device
- Connecting a Composite Video source device
- Connecting an iPhone/iPod device
- Connecting an external speaker
- Connecting a wireless dongle
- Connecting to an external memory device
- Playing sound through the projector
- Operation
- Starting up the projector
- Switching input signal
- Adjusting the projected image
- Hiding the image
- Securing the projector
- Selecting the aspect ratio
- Optimizing the image
- Operating in a high altitude environment
- Adjusting the sound
- Firmware upgrade
- Personalizing the projector menu display
- Playing files with iPhone/iPod
- Using iPhone/iPod pop-up menus
- Displaying images with PC and Video source devices
- Using PC/ Video pop-up menus
- Displaying files with internal memory, USB Drive and SD card
- Using USB Streaming
- Using Wireless Streaming
- Settings menu
- Shutting down the projector
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation
55
Using iPhone/iPod pop-up menus
The pop-up menu provides an on-screen display (OSD) for adjustments when playing
Videos, Photos and Apps.
Using the menu
1. To open the OSD menu, press on the projector or remote control when the
projection screen is displayed.
2. When the OSD is displayed, press / to select the desired item and adjust the
settings by using / .
3. To leave the OSD, press again.
Menu system
Menu Item Sub-menu Options
Wall Color
Off/Light Yellow/Pink/Light Green/
Blue/Blackboard
Aspect Ratio
Auto/Real//4:3/16:9/16:10
Phase
H. Size
Color Space
Conversion
Auto/RGB/YUV
Auto Keystone
On/Off
Keystone
Picture Mode
Settings
Picture Mode Bright/Standard/Cinema/Game/User
Reference Mode Bright/Standard/Cinema/Game
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature Warm/Normal/Cool
Save Settings