Operation Manual
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Connecting the power
- Connecting a computer
- Connecting Video source devices
- Connecting an HDMI source device
- Connecting a Component Video source device
- Connecting a Composite Video source device
- Connecting an iPhone/iPod device
- Connecting an external speaker
- Connecting a wireless dongle
- Connecting to an external memory device
- Playing sound through the projector
- Operation
- Starting up the projector
- Switching input signal
- Adjusting the projected image
- Hiding the image
- Securing the projector
- Selecting the aspect ratio
- Optimizing the image
- Operating in a high altitude environment
- Adjusting the sound
- Firmware upgrade
- Personalizing the projector menu display
- Playing files with iPhone/iPod
- Using iPhone/iPod pop-up menus
- Displaying images with PC and Video source devices
- Using PC/ Video pop-up menus
- Displaying files with internal memory, USB Drive and SD card
- Using USB Streaming
- Using Wireless Streaming
- Settings menu
- Shutting down the projector
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation
54
6. Press Menu on remote control to switch to music-related menu, use / to
select a music in file list and then press OK to start playing music.
If the iPhone or iPod is at the Main Menu, pressing Play/Pause will cause the iPhone or iPod to
start playing all of its music.
7. When a song is playing, press for Pause/Play.
Press / for replay or skip to next song. Have
long press on / to make the playing file rewind
or fast-forward. Press / to control the
volume.
Operation iPhone or iPod during video or
music playback
You are allowed to use remote control to operate your
iPhone or iPod when the projector is in both of power-
on and standby mode.
For more instructions on iPhone/iPod keys, see "iPhone/
iPod" on page 13 for details.