Service manual

Note 1: When L>=2W, defect count as liner defect.

Note 2: D=1/2(W+L)

Note 3: To verify the responsibility of following defects was caused by supplier, the IQC checks as requested on

above items before mass production such as the Polarizer Scratch, Gap Mura, TFT Glass broken…etc.

6.3 Outside dimension specification:

Testing

Order

Inspection Item Specification

Note

Name Unit Tolerance

Outside dimension (vertical)

mm ± 0.8 mm

Please refer to the product

spec for detailed dimension

definition

Note 1

2 Outside dimension (horizontal) mm ± 0.8 mm

3 Outside dimension (thickness) mm ± 0.8 mm

4 Weight g ± 100 g

5 Display tolerance ABS (a-b) mm 1.2 mm (Max.) Note 2

6 Display tolerance ABS (c-d) mm 1.2 mm (Max.) Note 2

7 Panel gap (Y) mm 1.0 mm (Max.) Note 3

Note 1: Thickness doesn’t include bending.

Note 2: Display tolerance definition

Note 3: Panel gap (Y) definition