Operation Manual

Operating the camera 41
English
To select White Balance:
1. Press > > White Balance.
2. Press or to enter the submenu.
3. Press or to select a white balance option. The preview result
based on the currently selected white balance is shown on the screen. (To
select the Custom mode, press and point the camera at a blank sheet of
white paper or something similar, then press the shutter for the camera to
detect proper colors.)
4. Press to confirm setting.
ISO
ISO configures the camera sensitivity to light. The higher the ISO value, the
brighter picture you can take in a low-light environment. Yet, you may see more
noise in the picture as you increase the ISO value.
Fluorescent_1 Adjusts for fluorescent lighting. Corrects the
green hue of fluorescent lighting. Ideal for
indoor photos under fluorescent lighting
without a flash.
Fluorescent_2
Custom Used when you want to manually adjust
white balance in a particular lighting
condition.
Icon Description
Automatically sets the ISO value.
Equivalent to color ISO 160/200 film. Used for outdoor
photography in bright sunlight.
Equivalent to color ISO 400/800/1600/3200/6400/12800 film.
Use it in a low-light environment or where the flash light is not
allowed.
Icon Mode Description
OK
OK