Service manual

- 36 -
Read OSD Rotation from EEPROM A3 9F XX
cksu
m 
Change Color Temp. to
C1/9300K/Bluish CC 01 XX
cksu
m 
Change C/T immediately.
And store C/T index to
EEPROM.
Change Color Temp. to
C2/6500K/sRGB CC 02 XX
cksu
m 
Change Color Temp. to
C3/5800K/Reddish CC 03 XX
cksu
m 
Change Color Temp. to User CC 04 XX
cksu
m 
Change Color Temp. to Cx CC 05 XX
cksu
m  Reserved
Change Input Source to D-Sub CD 01 XX
cksu
m 
Change Input Source to DVI CD 02 XX
cksu
m 
On burn in mode CE 01 XX
cksu
m  Store data to EEPROM
Off burn in mode CE XX* XX
cksu
m 
XX* = Non “1” value
Store data to EEPROM
Monitor is forced power saving CF 01 XX
cksu
m 
Monitor wake up from power saving CF XX* XX
cksu
m  XX* = Non “1” value
Change Sense-Eye mode to Standard C0 00 XX
cksu
m 
Change Sense-Eye
mode immediately. And
store the index to
EEPROM.
Change Sense-Eye mode to Movie1 C0 01 XX
cksu
m

Change Sense-Eye mode to Movie2 C0 02 XX
cksu
m 
Change Sense-Eye mode to Photo C0 03 XX
cksu
m 
Set luminance sensor mode to Off C1 00 XX
cksu
m

Change luminance
sensor mode
immediately. And store
the index to EEPROM.
Set luminance sensor mode to Bright C1 01 XX
cksu
m 
Set luminance sensor mode to
Moderate C1 02 XX
cksu
m 
Set luminance sensor mode to Dim C1 03 XX
cksu
m

Increase ADC R-Offset2 AC 23 Data
cksu
m 
Increase ADC G-Offset2 AC 24 Data
cksu
m 
Increase ADC B-Offset2 AC 25 Data
cksu
m

Increase ADC R-Gain AC 33 Data
cksu
m 
Increase ADC G-Gain AC 34 Data
cksu
m 