User Manual
Table Of Contents
- Copyright
- Disclaimer
- Power Safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- How to change cable connection after initial installation
- Using the monitor wall mount set (purchased separately)
- Getting the most from your BenQ Monitor
- How to adjust your monitor
- Navigating the main menu
- Troubleshooting
29 How to adjust your monitor
Video source selection in PIP/PBP mode
Your monitor scans for the available video sources in the following order: HDMI, DP, and
USB-C™, and displays the first available one. This video source will become the main source in
PIP/PBP mode. You will need to decide the second source for PIP/PBP mode from the menu in
PIP/PBP source on page 32. Menu options that are not available will become grayed out.
Refer to the following table to find your main source and its supporting second sources. To find
out the supported incoming display mode (input timing), please read the "Preset display
modes
" section from the link "Adjusting the Screen Resolution" on the CD.
Possible second sources
Inputs
HDMI-1 HDMI-2 DP USB-C™
Main
source
HDMI-1 VVV
HDMI-2 V V V
DP V V V
USB-C™ V V V