Manualshelf

Owners manual

ManualsBrandsBenQ ManualsComputers & LaptopsEX3200R 31.5" LED LCD Monitor - 16:9 - 4 ms - 1920 x 1080 - 16.7 Million Colors - 300 Nit - 20,000,000:1 - Full HD - H
11121314151617181920
13 How to change cable connection after initial installation
How to change cable connection after initial installation
To protect the curved screen, do not lay the screen face down on the desk without the
protection of the supplied cushion. If you prefer to change the cable connection after the initial
installation has been completed in How to assemble your monitor hardware on page 9, follow
the procedures below.
1. Turn off the monitor.
Turn off the monitor and the power before unplugging
the power cable. Turn off the computer before
unplugging the monitor signal cable.
2. Tilt the monitor to its extended position.
Gently tilt the monitor to the maximum extended
position. To properly tilt the monitor, see Tilt the
monitor. on page 12.
3. Remove the back cover.
Remove the back cover from its bottom as illustrated.
Follow the instructions in Connect the PC video cable.
on page 10 and change connected cables. Re-install the
back cover as instructed in Install the back cover. on
page 11.