Owners manual

12 How to assemble your monitor hardware
7. Lift the monitor.
Take the monitor out of the box by holding the stand
arm. Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
Remove the foam wrap from the monitor.
Consider keeping the box and packaging in storage for use in
the future when you may need to transport the monitor.
The fitted foam packing is ideal for protecting the monitor
during transport.
8. Connect the source(s).
Connect the other end of the video cable to an
appropriate port of a digital output source (e.g., a
computer).
9. Tilt the monitor.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
10.Connect-to and turn-on the power.
Connect the power cord to the power adapter. Plug the
other end of the power cord into a power outlet and
turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on
the monitor.
Turn on the computer too, and follow the instructions
in Getting the most from your BenQ Monitor on page
16 to install the monitor software.
To extend the service life of the product, we recommend
that you use your computer's power management function.