Owners manual

11 How to assemble your monitor hardware
To Connect the HDMI Cable
Pass the cable through the cable management hole on
the stand arm first. Connect the plug of the HDMI cable
to the HDMI port on the monitor.
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.
or
3. Connect the audio cable.
Pass the cable through the cable management hole on
the stand arm first.
You may connect headphones to the headphone jack
found on the back side of the monitor.
4. Connect the power adapter to the monitor.
Pass the cable through the cable management hole on
the stand arm first. Connect the power adapter to the
socket labelled on the rear of the monitor. Do not
connect the other end to a power outlet just yet.
5. Install the back cover.
Align the back cover with the holes on the back of the
monitor ( ), and press the sides and the bottom of
the back cover against the holes to lock it into place as
illustrated ( and ). Push from the bottom of the
cover and check if the it has been installed properly
().
To remove the back cover, see How to change cable
connection after initial installation on page 13 for more
information.
6. Attach the stand to the monitor.
1 1
2 2
3 3
4 4
1
2