Owners manual

10 How to assemble your monitor hardware
Unfold the front side of the box as illustrated to leave
some room for cable connection.
Remove the foam wrap from the monitor stand and
base. Open the foam wrap that protects the monitor
for the following cable connection.
2. Connect the PC video cable.
To Connect the DP Cable
Pass the cable through the cable management hole on
the stand arm first. Connect the plug of the DP cable to
the monitor video socket.
After the cable connection has been made between the
computer and the monitor and the monitor is powered on,
if the image is not displayed, disconnect the cable. Go to
System and DisplayPort on the OSD menu of the monitor
and change the setting from
1.2 to 1.1, and then connect the
cable again.
To go to the OSD menu, see Basic menu operation on page
23.
To Connect the mini DP Cable
Pass the cable through the cable management hole on
the stand arm first. Connect the plug of the mini DP
cable to the monitor video socket.
or