User's Manual

21
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver software
on a new computer which has never had a monitor driver installed before. This instruction is only suitable
for a computer which has never been used before, and for which the BenQ LCD Monitor is the first ever
monitor to be connected to it.
1. Follow the instructions in How to assemble your monitor hardware on page 12.
When Windows starts, it will automatically detect the new monitor and launch the Found New Hardware
Wizard. Follow the prompts until it displays the option to Install Hardware Device Drivers.
1. Check Search for a suitable driver for my device option, and click Next.
2. Look to confirm that the wizard has selected the correct name of your monitor and click Next.
3. Click Finish.
4. Restart the computer.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor connected to
it (and has monitor driver software installed), you should not be following these instructions. You should instead be
following the instructions for How to upgrade the monitor on an existing computer.