User's Manual

13
Orient and align the stand arm with the monitor, then push
them together until they click and lock into place.
Carefully lift the monitor, turn it over and place it upright
on its stand on a flat even surface.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
Your monitor is an edge-to-edge monitor and should be handled
with care. Avoid finger pressure on the screen surface. Excessive
force on the display is prohibited.
2. Connect the power cable to the monitor.
Pass the cable through the cable management hole on the
stand arm first.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the other
end to a power outlet just yet.
1
2