User's Manual

13 How to assemble your monitor hardware
Orient and align the stand arm with the monitor, then
push them together until they click and lock into place.
Tighten the screw(s) that fixes the stand to the monitor.
To secure or release a screw, a flat-head screwdriver or a
coin is required.
Depending on the monitor size, there may be more than one
screw that fixes the stand to the monitor. The illustrations in
this document are for your reference only and may look
different from the appearance of the product.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
Your monitor is an edge-to-edge and ultra slim monitor and
should be handled with care. Avoid finger pressure on the
screen surface. Adjust the screen angle by placing your
hands on the top and on the bottom of the monitor as
illustrated. Excessive force on the display is prohibited.
1
2