User manual

37 Navigating the main menu
Custom Key
1
Sets the function to be accessed by custom key 1.
• Picture Mode
• Low Blue Light
• Display Mode
• Brightness
• Contrast
• Auto
Adjustment
• Volume
• Mute
•
Input
• Super
Resolution
• Smart Focus
Custom Key
2
Sets the function to be accessed by custom key 2.
Custom Key
3
Sets the function to be accessed by custom key 3.
DDC/CI Allows the monitor settings to be set through the software
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
• ON
• OFF
HDMI Auto
Switch
When this function is activated, HDMI or HDMI / MHL
port will be in the input auto select loop. Otherwise,
HDMI or HDMI / MHL can only be selected by input select
or by hot key.
• ON
• OFF
Auto Power
Off
Sets the time to power off the monitor automatically in
power saving mode.
•
OFF
• 10min.
• 20min.
• 30min.
Resolution
Notice
Sets whether to display the resolution notice of the
recommended resolution when a new input source is
detected by the monitor.
•
ON
• OFF
Information Displays the current monitor property settings.
• Input
• Current
Resolution
• Optimum
Resolution
(best with the
monitor)
• Model Name
Reset All Resets all mode, color and geometry settings to the
factory default values.
• YES
• NO
Item Function Range
Downloaded from ManualMonitor.com Manuals