User Manual

Menus 77
WAP Messages
When you receive a new WAP message, will be shown on the
display. This option will start up the browser so you can read the
WAP message.
Go to URL
Allows you to link to the URL you enter.
WAP Settings
Allows you to configure settings for different network operators'
WAP servers, and then select the desired server to get online.
1. Scroll to the desired server and press (Option).
2. Select Add Profile to establish settings for a new server, or select
Edit to configure the selected server's settings:
• Profile Name: Gives the WAP server a name.
• Homepage: Sets the homepage that the browser will link to
when it is started up.
• IP Address: Enter the IP address used for accessing the mobile
Internet.
• Port: Enter the connection port specified by the network
operator.
• NAP: If you use a GPRS network, select GPRS NAP (Network
Access Point) settings or CSD NAP settings to get online. If
you use a dialup network, you are restricted to selecting only
the CSD NAP settings to connect to the Internet.
To configure GPRS NAP settings or CSD NAP settings,
choose Services > NAP Settings.
3. Press (Save) to save the settings.