User manual
Table Of Contents
- Copyright
- Disclaimer
- Please follow these safety instructions for best performance, and long life for your monitor
- 1. Getting started
- 2. Getting to know your monitor
- 3. How to assemble your monitor hardware
- 4. Getting the most from your BenQ monitor
- 5. Picture optimization
- 6. How to adjust your monitor
- 7. Troubleshooting
11 How to assemble your monitor hardware
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the
power cable. Turn off the computer before unplugging the
monitor signal cable.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like a towel on the
desk for padding, before laying the screen face down on a
flat clean padded surface.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate
voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor
surround and controls.
2. Press the locking clips to detach the monitor base
from the monitor stand arm.