Operation Manual

adapter. Next, remove the foreign substance or water and send it to the
maintenance center.
• Whenever there is data in the internal memory or the external memory
card, you should make a backup copy to a computer or disc. So, you can
have a backup solution if data loss occurs.
• If the lens cannot retract into the camera, please replace the battery first
(usually this is because of a drained battery). Then the lens should
retract automatically. If the lens still cannot retract, please contact your
dealer.
• Under no circumstances should you push the lens back manually as this
may damage the camera.
• Some camera models accepts non-rechargeable batteries. When using
these batteries, do not charge them. Otherwise, dangers such as
explosion and fire may occur.
• All original accessories are designed only for use with this camera model
you purchased. Do not use these accessories to other camera models or
cameras of other brands to avoid unpredictable danger or damage.
• It is normal for the camera to become warm during operation, because
the camera casing can conduct heat.
• Before initial use of a memory card, always format the card first using
the camera.
• Remember to slide the write-protect tab (if available) to the unlock
position. Otherwise, all data (if any) on the memory card is protected
and the card cannot be edited or formatted.
E1020_UM - EN.book Page 6 Tuesday, November 18, 2008 6:32 PM