User`s manual

The On-Screen Display (OSD) Menu 39
Adjusting V-Chip Setting
First-Time Setup
The sequence is as follows:
1. Press the MMENU button on the remote or the
Menu key on the television to display the main
menu.
2. Press the  or  buttons to select TTV and then
press EENTER to enter the submenu.
3. Press the  or  buttons to select VV-CHIP
Blocking Settings and then press EENTER to enter
the submenu.
4. Press the  or  buttons to select
"ENTER pass-
word",and then input 4-digit password to EENTER
V-CHIP Blocking Setting (the factory-preset pass-
word is "0" " 0" " 0" " 0").
Enter "0" " 0" " 0" " 0"
Enter V-CHIP Blocking Settings
DV2680-EN.fm Page 39 Tuesday, March 30, 2004 1:05 PM