User`s manual

Controls and Terminals 17
Connecting RGB (Min D-SUB 15 Pin Connector) Signals
1.The native display resolution of the television is1280 x 768. If the signal re s o lution is greater
than the native re s o lution, the screen may be unable to display image details clearly.
2. You will need a converter to connect a M acintosh com puter to the television using a PC D-SUB
15P cable.
3. Certain PC models cannot be connected to the television.
4. If your com puter has a DOS/V com patible D-SUB 15P, no adapter is require d .
5. The com puter in the illustra tion is show n only for re ference; your equipm ent may vary.
6. Additional equipm ent show n in the illustra tion is not provided.
7. Do not set the com puter's horizontal and vertical scanning fre q u e n c ies, because these scan-
ning frequencies are less than or greater than the frequency range.
8. If you require more inform ation on how to connect your equipm ent, please re fer to the m anual
for the piece of equipm ent you wish to attach.
Connect your computer's output cable to
the D-SUB input using a Min D-SUB 15
pin cable.
Connect your computer's audio out to the
television using an appropriate cable.
COM
Cr/PR Cb/Pb
DVI/HDCP
PC
D-SUB AUDIO
PC
PC D-Sub cable
Audio cable
DV2680-EN.fm Page 17 Tuesday, March 30, 2004 1:05 PM