Operation Manual

Benq DC 2110 User’s Manual
4
2.2 Insert And Remove The SmartMedia
TM
Card
Insert The SmartMedia
TM
Card
(1) Pull down the Card Cover Open Lever.
(2) Insert the SmartMedia
TM
card.
(3) Close the Memory Card Cover until you hear a click sound.
Remove The SmartMedia
TM
Card
(1) Switch off the power.
(2) Pull down the Card Cover Open Lever.
(3) Remove the SmartMedia
TM
card and close the Memory Card
Cover until you hear a click sound.
Note
If a new SmartMedia
TM
card is used, you'll have to format it first. Please refer to page 9 for
details.
Note
• Images stored in the SmartMedia
TM
card may be ruined or damaged if you turn off the cam-
era while it is in process of reading, formatting...etc.
•SmartMedia
TM
cards are a delicate electronic device. Please do not bend or drop it and
please avoid any strikes.
• Please do not place the SmartMedia
TM
card in or near to an environment of strong elec-
tronic or magnetic fields such like loud speakers or TV receivers.
• Please avoid using the camera in high or low temperatures.
• Please keep the camera away from dirt, sand and water or substances that may cause
malfunction of the memory card.
• Please clean the camera with a soft cloth.
• Please keep the SmartMedia
TM
card in its plastic bag when it's not in use. It's normal that the
SmartMedia
TM
card may get warm after use.
• Please make sure you switch off the power before you remove the SmartMedia
TM
card.