Operation Manual

Benq DC 2110 User’s Manual
7
White Balance
The camera is preset at "Auto" if you are not capturing the images in special light
conditions. There are four modes to select which are:
Auto
Daylight
Fluorescent
Tungsten
Resolution
There are three resolutions for you to select which are 2048 x 1536, 1600 x 1200 and
800 x 600.
Self Timer
Using this feature will delay the shutter release for about 10 seconds.
Set to "ON" and press MENU/ENTER Button. Then press Shutter Button to start the
self-timer. The Self-timer Indicator LED will start blinking at normal speed the first 7
seconds and will then speed up in the last 3 seconds as a warning to inform you that the
shutter is going to release soon. The self-timer function will be cancelled automatically
after the shutter is released.
Digital Zoom
If you would like to capture an enlarged image please set to "ON" and press MENU/
ENTER Button. The digital zoom function will be cancelled automatically after the
shutter is released.
Date/Time Stamp
If you would like to have the Date or Date/Time stamped on the captured image please
use this feature.
3.1.2. Playback Mode
Playback Mode ( )
This mode is used to display the stored image(s) or video(s) on the TFT LCD
Monitor or an external monitor. When the Mode Dial is set at this mode, the last
captured image will show on the TFT LCD Monitor or the external monitor.
If you are willing to show the stored image(s) or video(s) on an outer monitor or
TV please connect the camera with the outer monitor or TV via the video cable
Note
The digital zoom can only be activated when the TFT LCD Monitor is on. Please
note that it will take longer time to save the image into the memory card when
using this function.