Digital Camera 2110 User’s Manual
Copyright Copyright (c) 2002 by Benq Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without prior written permission from Benq Corporation. Brands and product names are trademarks or registered trademarks of their respective companies.
Benq DC 2110 User’s Manual 1. Touring your DC 2110 ..........................1 1.1. Checking package contents .................................. 1 1.2. Parts of the DC 2110 and their names .............. 1 1.2.1. Front View ..........................................................................1 1.2.2. Rear View ............................................................................2 1.2.3. Connection Ports ............................................................
Benq DC 2110 User’s Manual 5. Troubleshooting ..............................15 6. Specifications ...................................16 7. Service information ........................
Benq DC 2110 User’s Manual 1. TOURING YOUR DC 2110 1.1. Checking package contents The package should include the following items: DC 2110 digital camera USB cable Camera pouch 2 pcs of AA Battery SmartMediaTM card Hand Strap TV cable DC 2110 software CD- User’s Manual 1.2. Parts of the DC 2110 and their names 1.2.1.
Benq DC 2110 User’s Manual 1.2.2. Rear View LCD Button Viewfinder Menu/ Enter button Power Switch AF LED Flash LED TFT LCD Monitor Direction Button (Up/Down/Right/Left) 1.2.3. Connection Ports Video Connection Terminal (Video Output USB Connection Terminal DC Input Connection Point (DC 3V Strap Eyelet Memory Card Slot Card Cover Open Lever Memory Card Cover 1.2.4.
Benq DC 2110 User’s Manual 2. PREPARING YOUR DC 2110 FOR USING 2.1. Installing batteries and memory card Follow the steps below to install battery and memory card. If batteries are used: 1. Open the Battery Cover. 2. Load the batteries into the battery chamber following the polarity indications(+,_ ). 3. Close the Battery Cover until you hear a click sound.
Benq DC 2110 User’s Manual 2.2 Insert And Remove The SmartMediaTM Card Insert The SmartMediaTM Card (1) Pull down the Card Cover Open Lever. (2) Insert the SmartMediaTMcard. (3) Close the Memory Card Cover until you hear a click sound. Remove The SmartMediaTM Card (1) Switch off the power. (2) Pull down the Card Cover Open Lever. (3) Remove the SmartMediaTM card and close the Memory Card Cover until you hear a click sound. Note If a new SmartMediaTM card is used, you'll have to format it first.
Benq DC 2110 User’s Manual 2.3. LCD Panel Indicator Flash Mode Indicator Auto : Auto Flash : Fill-in Flash : Red-eyeReduction : Flash Off Self-timer Mode Indicator Setting up the self-timer Error Message E1 : Card Error E2 : Protected Card 000 : No Card 0 : Card Full Macro Mode Macro photography Battery Status : Batteries are with sufficient electricity power to support the camera's operations. : Batteries are about to drain soon. Please prepare new batteries. : Batteries drained.
Benq DC 2110 User’s Manual 3. USING THE DC 2110 The functions of DC 2110 are mainly composed of five modes-Recording mode, Playback mode, Video Mode, Setup Mode and PC Connection Mode. In this chapter, we will introduce the functions of DC 2110 according to these five modes. 3.1. Working Mode 3.1.1. Recording Mode Recording Mode ( ) This mode is used to capture still images. Please set the Mode Dial at this mode if you would like to capture still images. The normal focus range is 0.6m~infinity.
Benq DC 2110 User’s Manual White Balance The camera is preset at "Auto" if you are not capturing the images in special light conditions. There are four modes to select which are: Auto Daylight Fluorescent Tungsten Resolution There are three resolutions for you to select which are 2048 x 1536, 1600 x 1200 and 800 x 600. Self Timer Using this feature will delay the shutter release for about 10 seconds. Set to "ON" and press MENU/ENTER Button. Then press Shutter Button to start the self-timer.
Benq DC 2110 User’s Manual included in the kit. Thus the outer monitor or TV will replace the TFT LCD Monitor as the display screen. There are two video output signals to choose which are NTSC or PAL. Please note that if TV is used as the display screen please make sure you set it at AV channel. If the picture is not positioned in the center of the screen, please use the TV OSD (On Screen Display) or Menu to adjust. Playback Mode Menu Set the Mode Dial at Playback Mode ( ) and press the MENU/ENTER Button.
Benq DC 2110 User’s Manual Thumbnail If you would like to view the stored images in thumbnails (small pictures) please use this feature. Maximum 9 thumbnails can be shown on the TFT LCD Monitor. Use the Up & Down Direction Button to select the picture you'd like to view then press MENU/ ENTER Button to view the selected image in normal size. Use Left & Right Direction Button to view the next 9 images if more than 9 images are stored in the memory card.
Benq DC 2110 User’s Manual 3.1.3. Video Mode Video Mode ( ) This mode is used to capture videos. Video Mode Menu Set the Mode Dial at Video Mode ( ). Use the Right & Left Direction Button to change the setting. And after that please press MENU/ENTER Button to confirm the setting. Mode Video Mode Description Recording Time Item 5 10 15 20 Recording Time This feature is to set up the recording time. There are 4 recording times to choose which are 5. 10. 15 or 20 seconds. 3.1.4.
Benq DC 2110 User’s Manual Mode Description Setup Mode Date/Time LCD Brightness Video Interface Beep Reset to Default Language Item dd-mm-yyyy ( 01- 01- 2001 ) hh:mm AM/PM darker brighter NTSC PAL ON OFF OFF ON English German French Spanish Date/Time Using this feature you can change the setting of Date/Time. Please use Left & Right Direction Button to select the part you would like to change and use Up & Down Direction Button to change the setting.
Benq DC 2110 User’s Manual 3.2. Taking Pictures There are four steps to take pictures when using DC 2110. Step 1: Switch on the power. There will be a beep sound when the camera is switched on and there will be another beep sound when the camera is ready for shooting. The TFT LCD Monitor will be able to turned on by pressing the LCD Button 20 after the second beep sound. Step 2: Set the Mode Dial at Recording Mode ( ) Please press the Macro Button if you would like to take a close-up shot (0.2m~0.6m).
Benq DC 2110 User’s Manual Cautions! Please note that this camera is a delicate electronic device and should be kept away from: 1. Severe changes of temperature and humidity. 2. Sand, dust or dirt. 3. Strong vibration. 4. Direct sunlight exposure. 5. Placing inside a vehicle which the temperature may rise considerably. 6. Placing close to a high magnetic field such like loud speakers. 7. Pesticides. • Avoid direct sunlight exposure to the lens.
Benq DC 2110 User’s Manual 4. PC DEPENDENT FEATURES Preparations To use the PC dependent functions, you need to install your digital camera software and connect the camera to your PC. 4.1. Installing digital camera software • If your operation system is Windows 98, please setup the DC2110 driver first, if the operation system is Windows ME/2000/XP, then it's not necessary for you to setup driver in advanced, please refer to the descriptions of Universal Plug and Play installation instruction below.
Benq DC 2110 User’s Manual 4.2. The Software of this Installation CD Software Description 1. PhotoBase Arcsoft PhotoBase 3.0, for you to find and organize your media-files efficiently. You can use it to creat a slide show, a web album, or a video postcard, then sharing these media-files with your friends through internet. 2. PhotoImpression ArcSoft PhotoImpression 3.0, it is an easy-to-use photo editing and creative design program.
Benq DC 2110 User’s Manual 4.3. Connect to PC 1. If your operation system is Windows ME/2000/XP, you will not need to install the camera driver. 2. After the software installatioin is completed and the camera is connected to the PC, the PC will automatically create a new disk named Removable Disk (please see below picture). All the images stored in the SmartMedia TM card can be found in a folder named "100SSCAM" which the route is "Removable Disk / DCIM / 100SSCAM" .
Benq DC 2110 User’s Manual 5.
Benq DC 2110 User’s Manual Symptoms Causes Solutions There is something wrong with the color of the captured image • White Balance is not set properly • Reset white balance.
Benq DC 2110 User’s Manual Focusing Range Normal : 0.6m ~ infinity, Macro : 0.2 ~ 0.6m Shutter Mechanical and Electronic shutter Shutter Speed 1/4 ~ 1/1,000 sec Exposure Program AE / Exposure compensation +1.8EV ISO Equivalent 100,200 (Automatic) White Balance Auto / Manual (Daylight, Fluorescent, Tungsten) Flash Auto flash / Fill-in flash / Red-eye reduction / Flash off Flash Range 0.5 ~ 3.
Benq DC 2110 User’s Manual System Requirments FOR WINDOWS PC with processor better than MMX Pentium 233MHz Windows 98/98SE/2000/ME/XP Minimum 64MB RAM 100MB of available hard-disk space USB port CD-ROM drive 800x600 pixels,16-bit color display compatible monitor. (24-bit color display recommended) FOR MACINTOSH Power Mac G3 or later Mac OS 9.x Minimum 64MB RAM 50MB of available hard-disk space USB port CD-ROM drive 7.
