Operation Manual

BenQ DC 5530 User’s Manual
English
PC Dependent Features24
4.2 USB Mode
1. Connect the end of the smaller plug of the USB cable to
the DC E520+.
2. Connect the other end of the USB cable to an available
USB port on your computer.
3. Turn on the camera.
The USB screen is displayed.
4. A “Removable Disk” icon appears in “My Computer.”
Click this icon to access your images or video clips.
• When connecting to a computer, it is necessary to install a
battery.
4.3 PictBridge Mode
If a printer that supports PictBridge is available, images can be printed without using a
computer by connecting the camera directly to a PictBridge compliant printer.
Connecting the Camera to a PictBridge compliant Printer
1. In Playback Mode, press the [ ] button and scroll to PictBridge.
2. Select [ ] and then you will be prompted to connect a
USB cable to the camera and the PictBridge compliant
printer.
• To establish the connection, connect a USB cable.
• To cancel, press the [ ] button.
3. When the connection is established, you will be asked to
select [Print One], [Print All], or [Print Index]. Select the
desired option and then press the OK button.
4. [Setup], [Print], and [Exit] options will be displayed on
the bottom of the LCD monitor.
• If you select [Setup], [Pictbridge setup] screen will be
displayed. You may set [Copies], [Size], and [Quality],
if desired.
• If you are satisfied with the settings, select [Print] to
proceed.
• If you want to cancel, select [Exit].
• The functions described above may differ due to the
design of the printer you connect to.
DC_E520+_UM.book Page 24 Monday, November 21, 2005 3:23 PM