User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Power safety
- BenQ ecoFACTS
- Introduction
- Box contents
- Product overview
- Getting started
- Adjusting the angle
- Connecting the power
- Connecting to a network
- Connecting the HDMI cable (optional)
- Inserting the microSD card (to extend memory capacity)
- Removing the microSD card
- Installing the back cover
- Removing the back cover
- Connecting other USB devices
- Connecting the USB cable (for PC connection)
- Connecting headphones
- Switching the smart display on/off
- Basic operations
- The Home screens
- Connecting with the family (Family Board)
- Connecting to personal entertainment center
- Connecting with your contacts
- Connecting with other media devices
- Controlling wirelessly from your smartphone or tablet (Could Remote)
- Creating your BenQ account for BenQ services
- Synchronizing with your Google Account
- Introducing main applications
- Appendix: Connecting with your computer
- Specifications
- FAQ and troubleshooting
- General safety information
- Safety information about power adapter
25 Basic operations
3. To end the applications in use, tap > Task Manager. See Task Manager on page 67 for
more information.
Force shutdown
If your smart display does not respond to you, you may want to reboot. Power off the smart
display properly as instructed in Switching the smart display on/off on page 17.
Checking the system status quickly
The current system status is displayed on the bottom-right corner of the screen by status icons
and notifications.
1. If any new icon is displayed, tap the icon to display notification list.
2. Tap the notification to launch Settings or corresponding application for further operation
if necessary.
Updating software
Whenever a new version of software is available, you will be notified by the icon in the
status bar on the bottom-right corner of the screen. If the new software version becomes
available, please follow these steps to upgrade your smart display.
1. Make sure that your smart display is connected to the Internet properly. See Setting up
Internet connection on page 26 for more information.
2. Tap the icon to bring up a list of notifications, and tap System Update.
3. Tap Start to download the updated software. It might take a while to finish the download.
4. Tap
Reboot to reboot and start the update process. Once the update is done, the smart
display will enter the main Home screen.
Restoring to the default settings
To restore to the default values will delete all data, the self-installed applications and settings on
the smart display. Yet you can choose if you want to erase the data on the connected microSD
card.
1. To restore to the default values, tap > Backup & reset > Factory data reset.
You can check the running applications/widgets from > Settings > Apps > Running. Do not try to stop any
running applications/widgets from here unless you are aware of the consequences.
Turn off the smart display properly. Improper shut down (e.g. unplugging the power cord) may cause data loss.
• Alternatively, you can update the software manually from > System Update.
• You can install the software version released by BenQ only. It is the sole responsibility of the user if problems
(such as data loss and system failure) occurred due to non-factory installed software.