User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Power safety
- BenQ ecoFACTS
- Introduction
- Box contents
- Product overview
- Getting started
- Adjusting the angle
- Connecting the power
- Connecting to a network
- Connecting the HDMI cable (optional)
- Inserting the microSD card (to extend memory capacity)
- Removing the microSD card
- Installing the back cover
- Removing the back cover
- Connecting other USB devices
- Connecting the USB cable (for PC connection)
- Connecting headphones
- Switching the smart display on/off
- Basic operations
- The Home screens
- Connecting with the family (Family Board)
- Connecting to personal entertainment center
- Connecting with your contacts
- Connecting with other media devices
- Controlling wirelessly from your smartphone or tablet (Could Remote)
- Creating your BenQ account for BenQ services
- Synchronizing with your Google Account
- Introducing main applications
- Appendix: Connecting with your computer
- Specifications
- FAQ and troubleshooting
- General safety information
- Safety information about power adapter
14 Getting started
2. Connect the HDMI connector of the HDMI cable to the HDMI port of your computer.
3. Turn on the smart display. See Switching the smart display on on page 17 for details. Wait
until the smart display enters the main Home screen.
4. Tap on the bottom-left of the screen, and tap HDMI.The smart display is now
switched to Display mode and outputs video and audio signals from your computer.
Inserting the microSD card (to extend memory capacity)
The microSD card significantly extends your smart display’s memory capacity. This allows you
to save picture/video files, sound recordings, etc. You can also use the microSD card to save any
other files.
You can access the list of folders and files in >
Files. See Files on page 62 for more
information.
HDMI
Adjustment
Volume
Brightness
Contrast
Default
SRS 3D
HDMI