User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Power safety
- BenQ ecoFACTS
- Introduction
- Box contents
- Product overview
- Getting started
- Adjusting the angle
- Connecting the power
- Connecting to a network
- Connecting the HDMI cable (optional)
- Inserting the microSD card (to extend memory capacity)
- Removing the microSD card
- Installing the back cover
- Removing the back cover
- Connecting other USB devices
- Connecting the USB cable (for PC connection)
- Connecting headphones
- Switching the smart display on/off
- Basic operations
- The Home screens
- Connecting with the family (Family Board)
- Connecting to personal entertainment center
- Connecting with your contacts
- Connecting with other media devices
- Controlling wirelessly from your smartphone or tablet (Could Remote)
- Creating your BenQ account for BenQ services
- Synchronizing with your Google Account
- Introducing main applications
- Appendix: Connecting with your computer
- Specifications
- FAQ and troubleshooting
- General safety information
- Safety information about power adapter
12 Getting started
Adjusting the angle
Carefully lift the smart display and place it upright on its stand on a flat even surface. Position
the smart display and angle the screen to minimize unwanted reflections from other light
sources. Adjust the viewing angle as needed.
Connecting the power
1. Connect the power cord to the power adapter.
2. Connect the power adapter to the power jack on your smart display and route the cable.
3. Connect the power cord to a power outlet. The smart display is then supplied normally
with power.
1
2
3
Power supply is only possible within a temperature range of 0 °C (+32 °F) to +40 °C (+104 °F).