User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
56 Web management
Scheduling
You can change the schedule by clicking Scheduling. You can set System Time and Periodical
Restart.
You can select your Time Zone and the NTP Server from which the time is obtained.
You can check Enable to set Periodical Restart. You can also set restart time and day.
After you configure all the Scheduling settings, press Apply to proceed.