User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
53 Web management
4 Way Split enables or disables split screen presentations and has the same function as the split
screen button on a Button. See Split screen presentations on page 31 for more information split
screen presentations.
Stream Encryption is a security setting that allows you to select the level of encryption for the
connection between the Host and Buttons in order to protect it from hacking. The default setting for
this field is 3 Level, to change the setting to a lower level of encryption select 2 Level.
Login Code allows you to set a login password for connections by mobile devices which will appear
on the guide screen. The default setting for this field is Disable which means that no login password
is needed for mobile devices to connect to the Host. To set a custom login password for mobile
devices, select Custom and then enter the password you want in the field to the right of the Login
Code field. To set an automatically generated login password select Random.