User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
52 Web management
Host Output Resolution configures the Host’s output resolution for video broadcast by the Host.
When Host Output Resolution mode is set to Auto the Host will select the output resolution
based on the connected display’s native timing, or you can select an output resolution manually.
Screen Scale allows users to adjust the borders of the Host’s video output so that it properly fits
the screen of the connected display. This setting is mainly intended for users who connect the Host
to a touchscreen display, so that the edges of the video align to the edges of the display’s screen to
ensure the accuracy of touch gestures. To adjust the Screen Scale setting, click the Adjustment
button, then use the toggle buttons to scale the video to fit the screen.