User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
51 Web management
8. You may press Stop pairing anytime to stop the pairing process.
Advance Setting
Click Advance Setting to adjust Firewall, Host Output Resolution, Screen Scale, 4 Way
Split, Stream Encryption, Login Code, HDCP Auto, Allow AirPlay and Chromecast, and
Network Standby.
Firewall is a security setting that allows you to block/reject users from accessing the Host via its
WAN port in order to protect it from hacking. The default setting for this field is Reject which
enables the firewall and rejects access to the Host via its WAN port. To disable the firewall and allow
devices to access the Host via its WAN port select Accept. A warning message is prompted to let
you know the security risk.
Users will still be able to access the web management interface via a direct connection to the WAN port when
the Firewall is set to Reject.