User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
50 Web management
5. Press Start pairing to pair the Host to the Button via the web management interface, you will
have two minutes to pair with the Button.
6. Press the split screen key on the side of the Button for five seconds. The LED indicator of the
Button will blink blue for about 10 seconds. The pairing process is ongoing. A “Pairing in
progress” message will be shown on the screen.
7. The LED indicator of the Button will turn static green when the Host and Button are successfully
paired.
• Images are for reference only. Each product features a different serial number.
• The maximum number of Buttons you can pair with one Host is 32.
00:00:00
00:00:05
Pairing in progress
Pairing complete