User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
47 Web management
In the 2.4G Channel Width and 5G Channel Width fields you can configure the channel width
for your 2.4G and/or 5G Wi-Fi signal. The available options for 2.4G Channel Width are 20MHz
and 40MHz, while the available options for 5G Channel Width are 20MHz, 40MHz, and
80MHz. The default channel width for 2.4G Channel is 20MHz while the default channel width
for 5G Channel is 40MHz.
In 5G Mode, you can select the Wi-Fi standard for the 5G Wi-Fi signal. The available options are N
Only and AC Only. The default 5G Mode setting is N Only.
The supported wireless channels listed vary according to wireless regulations of the country/region which is listed
in the Wi-Fi Area field.
The Wi-Fi standard for the 2.4G Wi-Fi signal in the 2.4G Mode field is set to N Only and cannot be configured.