User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
46 Web management
In the 2.4G Channel and 5G Channel fields you can configure the Host to automatically select the
wireless channel with the best performance for either signal during the initial setup of the Host by
selecting Auto, or you can select a wireless channel manually. The default 2.4G Channel and 5G
Channel setting for the Host is Auto.