User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
39 Web management
Getting started
You can now use the web management interface to configure various settings of your Host.
Top command buttons
Change language
1. The default language is English. To change the interface language, go to the language settings panel
and you can see all available languages.
2. Click the language you want to switch to and your new language will be set.
3. Once a new language has been set both the web management interface and the product’s OSD
will feature the new language.
Logging out
Click Logout on the upper right corner.
Function bar
The function bar shows the settings menus available in the web management interface.
Supported languages vary by country/region where you purchase.
Function
bar
Main column
Top command buttons