User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
36 Web management
3. The default IP address of your Host is 192.168.20.1. Change your laptop's IP address to
192.168.20.x (e.g. 192.168.20.100).
4. On your browser, enter the IP address: 192.168.20.1. On the login page, enter the default user
name (admin) and password (0000).
5. You will successfully log into the web management interface.