User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
35 Web management
Web management
The product is equipped with a web management interface that enables you to configure its features
through a browser such as Google Chrome (version 49.0.26), Internet Explorer (version 8.0), or
Firefox (version 46.0.1).
Accessing the web management interface
Logging into the web management interface via direct connection
1. Connect your Host directly to a laptop using a network cable (RJ-45) and to a power source
using the power adapter.
2. Wait until the LED indicator on your Host lights up static green.
The features may vary according to different firmware versions.