User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
31 Starting and stopping presentations
Split screen presentations
The product allows up to 4 users to present simultaneously in a split screen orientation.
Starting a split screen presentation
1. Connect a Button to each computer that will be presenting in the split screen presentation. See
Setting up and powering a Button on page 20 for more information.
2. Start a normal presentation using one of the Host buttons. See Starting presentation on page 29
for more information.
3. Press the split screen button on the Host that started the presentation to enable split screen
presentations.
4. Once a notification appears on-screen indicating that the split screen function has been enabled,
press the Present key on the Button of the second computer that wants to join the split screen
presentation.
5. Repeat step 4 for all other users that want to join the split screen presentation.
Make sure that all Buttons have already been paired to the Host projecting the presentation. See Pairing a Button
and Host on page 24 for more information.
• Only up to 4 users are simultaneously supported in a split screen presentation.
• The layout of the split screen presentation will be dictated by the amount of users in the presentation.
• If split screen is not enabled by the initial Button, all subsequent connections by other Buttons will be full
screen presentations.