User Manual
Table Of Contents
- Copyright
- Disclaimer
- BenQ ecoFACTS
- Introduction
- Installation
- Environment check
- Assembling the Host
- Setting up the Host
- Positioning the Host antennas
- Connecting the HDMI cable and power
- Setting up and powering a Button
- Using Cable USB A(F) to USB A(M)
- Pairing a Button and Host
- Storing Buttons and USB cable in the cradle
- Resetting a Host
- Resetting a Button
- Enabling network standby mode
- Starting and stopping presentations
- Web management
- Troubleshooting
18 Installation
Assembling the adapter
Every adapter provided in the box includes a plug socket and plugs based on the region in which you
purchased the product. Below are images of the standard American, standard European, standard
Australian, and standard UK plugs:
To connect the plug of your choice, follow the steps below.
1. Align and insert the plug into the adapter.
2. Push the plug all the way in until it clips into place.
To disconnect the plug, follow the steps below.
1. Push the latch in the middle.
2. Detach the plug by pushing it outward and remove the plug.
Standard EuropeanStandard American Standard Australian Standard UK
1
2
2
1