User Manual

Italiano
81
Function Type Description ASCII
Edge Blend-
ing
Write Edge Blending Black Level Red
Decrease
<CR>*ebcr=-#<CR>
Write Edge Blending Black Level Red
Increase
<CR>*ebcr=+#<CR>
Read Edge Blending Black Level Red
Status
<CR>*ebcr=?#<CR>
Write Edge Blending Black Level Green
Decrease
<CR>*ebcg=-#<CR>
Write Edge Blending Black Level Green
Increase
<CR>*ebcg=+#<CR>
Read Edge Blending Black Level Green
Status
<CR>*ebcg=?#<CR>
Write Edge Blending Black Level Blue
Decrease
<CR>*ebcb=-#<CR>
Write Edge Blending Black Level Blue
Increase
<CR>*ebcb=+#<CR>
Read Edge Blending Black Level Blue
Status
<CR>*ebcb=?#<CR>
System
Write Standby Settings-Network on <CR>*standbynet=on#<CR>
Write Standby Settings-Network off <CR>*standbynet=off#<CR>
Read Standby Settings-Network Status <CR>*standbynet=?#<CR>
Write Auto Power Off-on <CR>*autopoweroff=on#<CR>
Write Auto Power Off-off <CR>*autopoweroff=off#<CR>
Read Auto Power Off-Status <CR>*autopoweroff=?#<CR>
Write Direct Power On-on <CR>*directpower=on#<CR>
Write Direct Power On-off <CR>*directpower=off#<CR>
Read Direct Power On-Status <CR>*directpower=?#<CR>
Write Set background to Logo <CR>*bg=logo#<CR>
Write Set background to Black <CR>*bg=black#<CR>
Write Set background to Blue <CR>*bg=blue#<CR>
Write Set background to White <CR>*bg=white#<CR>
Read Get background status <CR>*bg=?#<CR>
Write Startup logo off <CR>*startlogo=off#<CR>
Write Startup logo on <CR>*startlogo=on#<CR>
Write Get startup logo status <CR>*startlogo=?#<CR>
Write Select EDID WUXGA <CR>*edid=wuxga#<CR>
Write Select EDID 1080P <CR>*edid=1080p#<CR>
Read Get EDID selection <CR>*edid=?#<CR>
Write Trigger on <CR>*trigger=on#<CR>
Write Trigger off <CR>*trigger=off#<CR>
Read Trigger status <CR>*trigger=?#<CR>
Write Dynamic black on <CR>*db=on#<CR>
Write Dynamic black off <CR>*db=off#<CR>
Read Dynamic black status <CR>*db=?#<CR>
Write Factory reset <CR>*fact=reset#<CR>