User's Manual

BENQ Corporation
-5-
2-4 Hardware Installation
# Connect the Ethernet Cable
The 11Mbps Wireless LAN Access Point supports 10/100M Ethernet
connection. Attach your UTP Ethernet cable to the RJ-45 connector on
the Access Point. Then connect the other end of the RJ-45 cable to a
hub or a station. Please be sure to use the MDI port to connect the
Access Point to a hub. Otherwise, please use the MDI-X port to connect
the Access Point to a computer/station.
# Plug the Power Cable
Plug the power adapter to the power socket on the Access Point, and
plug the other end of the power into an electrical outlet.
ONLY use the power adapter supplied with the Access Point.
Otherwise, the product may be damaged.
NOTE