User's Manual

BENQ Corporation 9
3.3 Encryption
According to WEP function select, this page allows the entry of four keys for
64-bit and 128-bit encryption. Each key must consist of hex digits to be
written to the driver and registry. This means that only digit number 0-9 and
letters A-F are valid entries. Therefore, if entered incorrectly, the program will
not write keys to a driver. You can also use Alphanumeric or Passphrase to
create keys.
- Key 1 – Key 4
When you want to enter the keys manually, you may use these four
fields. If you wish this node to match keys in a different vendor’s product,
this may be necessary.
- Apply
You may also update the driver with the four keys displayed in Key field
by pressing this button. The keys are also written to the registry for
permanent storage. This button clears all the bytes in the four keys. It’s
very useful when you wish to start over or enter manually.