User's Manual

BENQ Corporation 8
Profile Name
These settings will be stored by the given name.
Network Name
This field shows the network name or called SSID, which your AWL200 will be
associated with. If “ANY” is the name showed, it means any network name
could be associated with.
Network Type
You can select from a list of supporting network types in this field. The
network types displayed will have two values as following: “Access Point” and
“Peer-to-Peer”.
Access Point (Infrastructure)
This is an operation mode, which requires the existence of an 802.11 Access
Point. Owing to the existence of the Access Point, all communication is done
via the Access Point, which relays packets to other wireless Clients in the
BSS as well as to nodes on a wired network such as Ethernet.
Peer-to-Peer (Ad Hoc)
This is a non-compliant mode, which will allow AWL200 cards to talk to one
another without an AP.