User manual

Operating the camera 19
English
Operating the camera
The procedure below is a general guideline for basic operation. It is particularly
useful if you are new to the camera.
1. Press the Power button to turn the power on.
2. Slide the mode switch to and press > , , , or
to locate desired options (under two different tabs: and ), and then
press or to make selections.
3. Slide to to zoom-in or to zoom-out.
4. Press the shutter halfway to set automatic focus. Once the focus is set, the
focus frame color will turn from white (unfocused) to green (focused). If the
focus frame color is red and you press the shutter down, it might result in a
blurred photo.
5. Press the shutter down fully to capture.
6. Release the shutter.
7. Slide the mode switch to and enter the
Movie Record mode. Next,
adjust the optical zoom as needed and press the shutter down to start video
recording (press the shutter again to stop video recording).
8. Slide the mode switch to and view captured images or recorded videos.
You can press , or to move to different images/videos, slide to press
or to zoom-in/out a captured image, or slide to to view 9 images on
the screen.
Remember to follow the on-screen display or slide to for instructions
(wherever available). Next, press corresponding buttons to access and set more
options. At any time, you can cancel the current operation by pressing to
return to your previous step.
Optical Zoom
Digital Zoom
AE100_AE200 UM - EN.book Page 19 Wednesday, August 17, 2011 5:21 PM
Downloaded From camera-usermanual.com BenQ Manuals