Owners manual

Operation 77
5. System Setup: Advanced menu
Standby
Settings
Network
Selecting On enables the function. The projector is able to provide
the network function when it is in standby mode.
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
"Connection" on page 23 for how
to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press /
to choose the source that you wish to use. See
"Connection" on page
23
for how to make the connection.
Enabling this function slightly increases the standby power consumption.
Network
settings
Wired LAN
See "Controlling the projector through a LAN environment" on page
49 for details.
Wireless LAN
See "Controlling the projector through a LAN environment" on page
49 for details.
Remote Desktop
See "Displaying image through Q Presenter" on page 58 for details.
Projection Login Code
See "Using the Projection Login Code" on page 61 for details.
Broadcasting
See "Using the broadcassting function" on page 62 for details.
AMX Device Discovery
When AMX Device Discovery is On, the projector can be
detected by AMX controller.
MAC Address
Displays the mac address for this projector.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
Projector Installation, Language, High Altitude Mode, Security
Settings, Baud Rate.
FUNCTION DESCRIPTION