Owners manual

Operation 73
2. Picture menu
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type.
See "Selecting a picture mode" on page 40 for details.
Reference
Mode
Selects a picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections listed
on the same page below.
See "Setting the User 1/User 2 mode" on page 40 for details.
Brightness
Adjusts the brightness of the image.
See "Adjusting Brightness" on page 41 for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 41 for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 41 for details.
The function is only available when Video or S-Video with NTSC system
is selected.
Tint
Adjusts the red and green color tones of the image.
See "Adjusting Tint" on page 41 for details.
The function is only available when Video or S-Video with NTSC system
is selected.
Sharpness
Adjusts the image to make it look sharper or softer.
See "Adjusting Sharpness" on page 41 for details.
The function is only available when Video or S-Video with NTSC system
is selected.
Brilliant
Color
Adjusts white peaking while maintaining correct color presentation.
See "Adjusting Brilliant Color" on page 41 for details.
Color
Te m p e r a t u r e
See "Selecting a Color Temperature" on page 41 for details.
Color
Temperature
Fine Tuning
See "Setting a preferred color temperature" on page 42 for details.
3D Color
Management
See "3D Color Management" on page 42 for details.
Reset picture
settings
See "Resetting current or all picture modes" on page 43 for details.
3. Source menu
Quick Auto
Search
See "Switching input signal" on page 37 for details.
Color Space
Conversion
See "Changing Color Space" on page 37 for details.
FUNCTION DESCRIPTION