Owners manual

Introduction 13
10. ► Right/ Increase volume level
Increases volume. See "Adjusting the
sound level" on page 47 for details.
(available in SH915)
When the On-Screen Display (OSD) menu
is activated, the #2, #5, #10, and #12 keys
are used as directional arrows to select the
desired menu items and to make
adjustments. See "Using the menus" on
page 33 for details.
10. Keystone/Arrow keys ( /► Right)
Manually correct distorted images
resulting from an angled projection. See
"Correcting keystone" on page 28 for
detail. (available in SW916)
When the On-Screen Display (OSD) menu
is activated, the #2, #5, #10, and #12 keys
are used as directional arrows to select the
desired menu items and to make
adjustments. See "Using the menus" on
page 33 for details.
11. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 37 for
details.
12. Keystone/Arrow keys ( /▼ Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 28 for
details.
13. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See "Indicators" on page 85 for
details.
14. TEMPerature indicator light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 85 for details.