Owners manual

Introduction12
Controls and functions
Projector
SH915
SW916
1. FOCUS/ZOOM Ring
Used to adjust the projected image
appearance. See "Fine-tuning the image
size and clarity" on page 28 for details.
2. Keystone/Arrow keys ( /▲ Up)
Manually corrects distorted images
resulting from an angled projection.
See "Correcting keystone" on page 28 for
details.
3. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
See "Using
the menus" on page 33 for details.
4. MODE/ENTER
Selects an available picture setup mode.
See "Selecting a picture mode" on page
40 for details.
Enacts the selected On-Screen Display
(OSD) menu item. See "Using the menus"
on page 33 for details.
5. ◄ Left/ Decrease volume level
Decreases volume. See "Adjusting the
sound level" on page 47 for details.
(available in SH915)
5. Keystone/Arrow keys ( /◄ Left)
Manually correct distorted images
resulting from an angled projection. See
"Correcting keystone" on page 28 for
detail. (available in SW916)
6. ECO BLANK
U
sed to hide the screen picture. See
"Hiding the image" on page 45 for details.
7. POWER
Toggles the projector between standby
mode and on.
See "Starting up the projector" on page
26 and "Shutting down the projector" on
page 65 for details.
8. POWER indicator light
Lights up or flashes when the projector is
under operation. See "Indicators" on
page 85 for details.
9. AUTO
Automatically determines the best
picture timings for the displayed image.
See "Auto-adjusting the image" on page
27 for details.
1
2
4
9
5
6
11
12
13
14
3
7
8
10
1
2
4
9
5.
6
11
12
13
14
3
7
8
10.